Asko PROFESSIONAL WMC84P Washer Manual

The Asko PROFESSIONAL WMC84P is a high-efficiency washer designed for commercial use, featuring advanced washing technology, multiple wash programs, and energy-saving options. This manual provides detailed information on safety, features, installation, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Water Supply 7. Operating the Washer 8. Maintenance and Care 9. Troubleshooting

Features at a Glance

Key components: Large capacity drum, multiple wash cycles, energy-efficient design, user-friendly interface, and robust construction.

Feature	Description
Large Capacity Drum	Accommodates large loads for commercial use
Multiple Wash Cycles	Variety of settings for different fabric types
Energy-Efficient Design	Reduces water and energy consumption
User-Friendly Interface	Intuitive controls for easy operation
Robust Construction	Durable materials for long-lasting performance

Installation

Ensure proper installation for optimal performance. Follow the guidelines below.

Unpack the washer and inspect for any damage.
Connect the water supply hoses to the appropriate inlets.
Ensure the drain hose is properly positioned.
Plug the washer into a grounded electrical outlet.

WARNING! Ensure all connections are secure to prevent leaks.

First-Time Setup

Power on the washer and follow the on-screen prompts to configure settings.

Select the desired language from the setup menu.
Adjust water hardness settings if necessary.
Run a test cycle to ensure proper operation.

CAUTION! Ensure the washer is level to avoid vibrations during operation.

Specifications

Model: Asko PROFESSIONAL WMC84P
Capacity: 8 kg
Spin Speed: Up to 1400 RPM
Energy Rating: A+++ (most efficient)
Dimensions: 85 cm x 60 cm x 60 cm
Weight: 75 kg
Power Supply: 220-240V, 50Hz

Controls and Settings

Access the control panel to select wash programs, adjust settings, and monitor progress.

Control Panel: Start/Stop, Cycle Selector, Temperature Control, Spin Speed Control.

Connecting Water Supply

Ensure proper connection to the water supply for optimal performance.

Turn off the main water supply before connecting hoses.
Attach hoses to the washer and the water supply.
Check for leaks after turning the water supply back on.

Tip: Use Teflon tape on threads to ensure a tight seal.

Operating the Washer

Follow these steps to operate the washer effectively.

Load laundry into the drum without overloading.
Select the appropriate wash cycle based on fabric type.
Add detergent to the designated compartment.
Press the Start button to begin the wash cycle.

WARNING! Do not open the door during operation.

Maintenance and Care

Regular maintenance ensures the longevity of your washer.

Clean the detergent drawer regularly.
Check and clean the filter as needed.
Inspect hoses for wear and replace if necessary.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Washer won't start	Power supply issue	Check power connection and circuit breaker.
No water filling	Hoses kinked	Ensure hoses are straight and not blocked.
Excessive vibrations	Unlevel washer	Adjust feet to level the washer.
Door won't open	Cycle not complete	Wait for the cycle to finish before opening.

Reset: Refer to the user manual for reset instructions.

Service: Contact customer support for further assistance.