Asko Professional WMC64P Washer Manual

The Asko Professional WMC64P is a high-efficiency washer designed for commercial use, featuring advanced technology for optimal cleaning performance. It offers a variety of wash programs, customizable settings, and energy-efficient operation. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Water Supply 7. Operating the Washer 8. Maintenance and Care 9. Troubleshooting

Features at a Glance

Key components: Large capacity drum, multiple wash cycles, energy-efficient design, user-friendly interface, and advanced water management system.

Feature	Description
Large Capacity Drum	Accommodates large loads for efficient washing
Multiple Wash Cycles	Customizable settings for various fabric types
Energy-Efficient Design	Reduces water and energy consumption
User-Friendly Interface	Intuitive controls for easy operation
Advanced Water Management	Optimizes water usage for each cycle

Installation

Unpack and inspect contents. Ensure the washer is placed on a stable surface.

Connect water supply: Attach hoses to the appropriate inlet valves.
Level the washer: Adjust the feet to ensure stability.
Plug into a power source: Ensure proper voltage and grounding.

WARNING! Ensure all connections are secure to prevent leaks.

First-Time Setup

Power on the washer and follow the on-screen prompts to configure settings.

Select language: Choose your preferred language from the menu.
Set water hardness: Adjust settings based on your water quality.
Run a test cycle: Ensure all functions are operating correctly.

CAUTION! Follow all safety instructions during setup.

Specifications

Model: Asko Professional WMC64P
Capacity: 6.4 cubic feet
Power Supply: 220-240V, 50Hz
Water Consumption: 10-15 gallons per cycle
Spin Speed: Up to 1400 RPM
Dimensions: 27" W x 34" H x 30" D
Weight: 200 lbs

Controls and Settings

Access the control panel for wash cycle selection, temperature settings, and additional options.

Control Panel: Start/Stop, Cycle Selector, Temperature Control, Spin Speed Adjustment.

Connecting Water Supply

Ensure proper connection to hot and cold water supplies.

Turn off water supply before connecting hoses.
Match hoses to corresponding inlets (hot/cold).
Check for leaks after connection.

Tip: Use Teflon tape on hose threads for a secure fit.

Operating the Washer

Follow the instructions for selecting wash cycles and starting the machine.

Load laundry: Do not overload the drum.
Select desired wash cycle and options.
Press Start to begin the wash.

WARNING! Do not open the door during operation.

Maintenance and Care

Regular maintenance ensures optimal performance and longevity.

Clean the lint filter after each use.
Inspect hoses for wear and replace if necessary.
Run a cleaning cycle monthly.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Washer won't start	Power supply issue	Check power connection and circuit breaker.
No water filling	Hoses kinked	Ensure hoses are straight and not blocked.
Excessive vibration	Unbalanced load	Redistribute laundry evenly in the drum.
Door won't open	Cycle not complete	Wait for cycle to finish before opening.

Service: For further assistance, contact customer support.