Asko W20864C-3 Washer Manual

The Asko W20864C-3 is a high-efficiency washing machine designed to provide superior cleaning performance while being environmentally friendly. It features a variety of wash programs, adjustable spin speeds, and a user-friendly interface. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Water Supply 7. Operating the Washer 8. Maintenance and Care 9. Troubleshooting

Features at a Glance

Key components: Large capacity drum, multiple wash cycles, energy-efficient design, and intuitive control panel.

Feature	Description
Large Capacity Drum	Accommodates large loads for fewer washes
Multiple Wash Cycles	Customizable settings for different fabric types
Energy Efficient	Designed to save water and electricity
Intuitive Control Panel	User-friendly interface for easy operation
Delay Start	Schedule washes at your convenience
Child Lock	Prevents accidental operation
Self-Cleaning Filter	Maintains optimal performance

Installation

Unpack and inspect contents. Ensure the washer is placed on a level surface.

Connect water supply: Attach hoses to hot and cold water valves.
Connect drain hose: Ensure proper drainage into a standpipe.
Plug into AC power: Use a grounded outlet.
Level the washer: Adjust feet for stability.

WARNING! Ensure all connections are secure to prevent leaks.

First-Time Setup

Power on the washer; follow on-screen prompts to select language and preferences.

Set water hardness: Adjust settings based on local water quality.
Choose wash programs: Select preferred cycles for different fabrics.
Adjust spin speed: Set according to load type.

CAUTION! Ensure the washer is level before use.

Specifications

Model: Asko W20864C-3
Capacity: 8 kg (17.6 lbs)
Dimensions: 85 cm x 60 cm x 60 cm
Energy Rating: A+++ (most efficient)
Water Consumption: 40 liters per cycle
Spin Speed: Up to 1600 RPM
Noise Level: 48 dB (wash), 75 dB (spin)

Controls and Settings

Access wash programs via the control panel. Options include temperature settings, spin speed, and additional features like pre-wash and extra rinse.

Display: LED indicators for cycle status and time remaining.

Connecting Water Supply

Ensure proper connection to hot and cold water supplies.

Turn off water supply before connecting hoses.
Match hoses to corresponding water inlets.
Check for leaks after connections are made.

Tip: Use Teflon tape on threaded connections to prevent leaks.

Operating the Washer

Load clothes into the drum, select desired wash cycle, and press start.

Load clothes: Do not overload the drum.
Select cycle: Use the control panel to choose the appropriate wash program.
Start wash: Press the start button to begin the cycle.

WARNING! Do not open the door during operation.

Maintenance and Care

Regular maintenance is essential for optimal performance.

Clean the detergent drawer regularly.
Check and clean the filter as needed.
Run a maintenance wash monthly to keep the drum fresh.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Washer won't start	Power supply issue	Check power cord and outlet.
No water entering	Hoses kinked	Ensure hoses are straight and connected.
Excessive vibration	Unlevel washer	Adjust feet to level the washer.
Clothes not clean	Overloading	Reduce load size and select appropriate cycle.
Door won't open	Cycle not complete	Wait for cycle to finish before opening.

Reset: Unplug for 5 minutes to reset the machine.