Asko W2096R Washer Manual

The Asko W2096R is a high-efficiency washer designed to provide superior cleaning performance while being environmentally friendly. It features a variety of wash programs, a large capacity drum, and advanced technology to ensure optimal washing results. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Water Supply 7. Operating the Washer 8. Maintenance and Care 9. Troubleshooting

Features at a Glance

Key components: Large capacity drum, multiple wash programs, energy-efficient design, user-friendly interface, and advanced water management system.

Feature	Description
Large Capacity Drum	Accommodates larger loads for fewer washes
Multiple Wash Programs	Customizable settings for various fabric types
Energy Efficient	Designed to save water and electricity
User-Friendly Interface	Easy-to-navigate controls and display
Advanced Water Management	Optimizes water usage for each load

Installation

Unpack and inspect contents. Place the washer on a level surface.

Connect water supply: Attach hoses to the water inlet valves.
Connect drain hose: Ensure proper drainage into a standpipe or laundry tub.
Plug into AC power: Ensure the outlet is grounded.

WARNING! Ensure all connections are secure to prevent leaks.

First-Time Setup

Power on the washer; follow on-screen prompts to select language and settings.

Set preferred wash settings: Choose from available programs.
Adjust water temperature: Select hot, warm, or cold based on fabric care.
Load laundry: Do not overload to ensure optimal cleaning.

CAUTION! Ensure the washer is level to avoid vibrations during operation.

Specifications

Model: Asko W2096R
Capacity: 5.0 cu. ft.
Energy Rating: Energy Star certified
Dimensions: 24" W x 34" H x 24" D
Weight: 150 lbs.
Power Supply: 120V, 60Hz
Water Consumption: 15 gallons per load

Controls and Settings

Access settings via the digital display. Controls include wash program selection, temperature adjustment, and spin speed settings.

Additional Features: Delay start, child lock, and cycle status indicator.

Connecting Water Supply

Ensure proper connection to hot and cold water supply lines.

Turn off water supply before connecting hoses.
Match hoses to corresponding water inlet valves.
Check for leaks after connections are made.

Tip: Use plumber's tape on threads to prevent leaks.

Operating the Washer

Follow the steps to start a wash cycle.

Load laundry into the drum.
Select desired wash program and options.
Press START to begin the cycle.
Monitor cycle progress on the display.

WARNING! Do not open the door during operation.

Maintenance and Care

Regular maintenance is essential for optimal performance.

Clean the lint filter regularly.
Check hoses for wear and replace if necessary.
Run a cleaning cycle monthly to prevent buildup.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Washer won't start	Power supply issue	Check power connection and circuit breaker.
Water not filling	Hose kinked	Inspect hoses for kinks or blockages.
Excessive vibrations	Unlevel washer	Adjust feet to level the washer.
Clothes not clean	Overloading	Reduce load size for better cleaning.

Reset: Unplug for 5 minutes to reset the control board.

Service: Contact customer support for further assistance.