Asko W3086CW-AU Washer Manual

The Asko W3086CW-AU is a high-efficiency front-loading washing machine designed to provide exceptional cleaning performance while being environmentally friendly. It features multiple wash programs, a large capacity drum, and advanced technology for optimal water and energy usage. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Water Supply 7. Operating the Washer 8. Maintenance and Care 9. Regulatory Information 10. Troubleshooting

Features at a Glance

Key components: Front-loading design, multiple wash programs, energy-efficient operation, large capacity drum, and user-friendly controls.

Feature	Description
Multiple wash programs	Customizable settings for different fabric types and soil levels
Energy efficiency	Designed to use less water and energy compared to traditional washers
Large capacity drum	Accommodates larger loads for fewer wash cycles
Quiet operation	Engineered for low noise during washing and spinning
Child lock	Prevents accidental operation by children

Installation

Unpack and inspect contents. Ensure the washer is placed on a level surface.

Connect water supply: Attach hoses to the hot and cold water inlets.
Connect drain hose: Ensure proper drainage into a standpipe or laundry tub.
Plug into AC power: Use a grounded outlet for safety.

WARNING! Ensure all connections are secure to prevent leaks.

First-Time Setup

Power on the washer; follow the on-screen prompts to select language and settings.

Run a test cycle: Use an empty load to check for leaks and proper operation.
Set preferred wash settings: Customize options based on your laundry needs.

CAUTION! Ensure the washer is level to avoid vibrations during operation.

Specifications

Model: Asko W3086CW-AU.
Type: Front-loading washing machine.
Capacity: 8 kg.
Energy Rating: 5 stars.
Water Consumption: 50 liters per cycle.
Spin Speed: Up to 1400 RPM.
Dimensions: 850 mm (H) x 600 mm (W) x 600 mm (D).
Power Supply: 220-240V, 50Hz.

Controls and Settings

Access controls via the front panel: Start/Pause, Program selection, Temperature settings, Spin speed adjustment.

Display: LED indicators for cycle status, time remaining, and error messages.

Connecting Water Supply

Ensure proper connection to hot and cold water supply lines.

Turn off water supply before connecting hoses.
Check for leaks after connection.

Tip: Use Teflon tape on hose threads for a secure seal.

Operating the Washer

Load laundry, select desired program, and press Start.

Load clothes evenly to maintain balance.
Select wash program based on fabric type.
Press Start to begin the cycle.

WARNING! Do not overload the washer; it may cause damage.

Maintenance and Care

Regularly clean the detergent drawer and door seal to prevent buildup.

CAUTION! Unplug the washer before performing maintenance.

Regulatory Information

Complies with Australian safety standards. For support, visit www.asko.com.au or contact customer service.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Washer not starting	Power supply issue	Check power connection and outlet.
No water filling	Water supply issue	Ensure water valves are open and hoses are connected.
Excessive vibration	Unbalanced load	Redistribute laundry evenly in the drum.
Door not locking	Obstruction or malfunction	Check for obstructions; contact service if issue persists.

Reset: Unplug for 5 minutes to reset the control board.

Service: 1-800-ASKO; www.asko.com.au