Asko WM85 Washer Manual

The Asko WM85 is a high-efficiency washing machine designed to provide superior cleaning performance while being environmentally friendly. It features multiple wash programs, a large capacity drum, and advanced technology to ensure optimal washing results. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Water Supply 7. Operating the Washer 8. Maintenance and Care 9. Troubleshooting

Features at a Glance

Key components: Large capacity drum, multiple wash programs, energy-efficient design, user-friendly controls, and advanced water management system.

Feature	Description
Multiple Wash Programs	Various settings for different fabric types and soil levels
Energy Efficiency	Designed to use less water and energy
Large Capacity Drum	Can handle larger loads for fewer wash cycles
User-Friendly Controls	Intuitive interface for easy operation
Advanced Water Management	Optimizes water usage for each load

Installation

Unpack and inspect contents. Place the washer on a level surface.

Connect the water supply: Attach hoses to the water inlet valves.
Connect the drain hose: Ensure it is securely placed in the drain.
Plug into AC power: Ensure the outlet is grounded.

WARNING! Ensure all connections are secure to prevent leaks.

First-Time Setup

Power on the washer; follow the on-screen prompts to set preferences.

Select language: Choose your preferred language from the settings menu.
Set water hardness: Adjust settings based on your water supply.
Run a test cycle: Ensure everything is functioning correctly.

CAUTION! Ensure the washer is level to avoid vibrations during operation.

Specifications

Model: Asko WM85
Capacity: 8 kg
Energy Rating: A+++ (most efficient)
Dimensions: 85 cm x 60 cm x 60 cm
Weight: 70 kg
Water Consumption: 50 liters per cycle
Power Supply: 220-240V, 50Hz

Controls and Settings

Access the control panel for wash settings, cycle selection, and additional options.

Control Panel: Start/Stop, Cycle Selector, Temperature Control, Spin Speed, Delay Start.

Connecting Water Supply

Ensure proper connections to avoid leaks.

Turn off the water supply before connecting hoses.
Match hoses to the correct inlet valves (hot/cold).
Check for leaks after connections are made.

Tip: Use Teflon tape on hose threads for a better seal.

Operating the Washer

Follow the instructions for selecting wash cycles and starting the machine.

Load laundry: Do not overload the drum.
Select the desired wash cycle and options.
Press Start to begin the wash.

WARNING! Do not open the door during operation.

Maintenance and Care

Regular maintenance is essential for optimal performance.

Clean the detergent drawer regularly.
Check and clean the filter as needed.
Run a maintenance wash monthly.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Washer won't start	Power supply issue	Check power connection and outlet.
No water filling	Hoses kinked	Ensure hoses are straight and not blocked.
Excessive vibrations	Unlevel washer	Adjust the feet to level the washer.
Door won't open	Cycle not complete	Wait for the cycle to finish before opening.

Reset: Refer to the user manual for reset instructions.